Skip to content Skip to navigation menu

Filters

122 Results found

Display using
  • Brand

  • EN 143

  • Price Range

  • Code:3M0211
    Discover…
    This replacement filter holder is for use with the 3M 7500 Series of half face mask respirators.

    Learn more…
    • Replacement part for use with the 3M 7500 Series of half face mask respirators
    • Easy to fit
    • Parts should be checked regularly for signs of wear and damage, and replaced when necessary
  • Code:3M0217
    Discover…
    This replacement odour filter pad is for use with the 3M Adflo powered respirator system.

    Learn more…
    • Replacement part for the 3M Adflo powered respirator
    • For use with a 3M Adflo odour filter
    • Designed to replace used, worn or damaged pads within the filter to extend its service life
    • Not required if a gas filter is already in use
    • Parts should be checked regularly for signs of wear and damage, and replaced when necessary
    • 3M part number: 837120 / 83 71 20
  • Code:3M0426
    Discover…
    For use with the 3M Adflo powered respirator system, this A1B1E1 filter offers respiratory protection against certain vapours and gases.

    Learn more…
    • For use with the 3M Adflo powered respirator system
    • A1B1E1 gas filters protect against organic vapours, inorganic vapours and acid gases
    • Should always be used with a particulate filter
    • 3M part number: 83 72 42 / 837242
  • Code:3M9700
    Discover…
    For use with the 3M Secure Click HF-800 Series of reusable half-face masks, these particulate and nuisance odour filters are simple to fit into place and are secured with an audible click so you can be sure they’re fitted correctly.

    Learn more…
    • Filter cartridges for use with the 3M Secure Click HF-800 and HF-800SD reusable half-face masks
    • Dual-flow construction allows for easier breathing
    • Protect against particulates, nuisance-level organic vapour and acid gas
    • Easy to fit into place; simply align the connectors and push until you hear a click
    • Weight: 20g
    • Filter retainer sold separately
  • Code:3M9300
    Discover…
    For use with the 3M Secure Click HF-800 Series of reusable half-face masks, these particulate filters are simple to fit into place and are secured with an audible click so you can be sure they’re fitted correctly.

    Learn more…
    • Filter cartridges for use with the 3M Secure Click HF-800 and HF-800SD reusable half-face masks
    • Dual-flow construction allows for easier breathing
    • Protect against particulates
    • Easy to fit into place; simply align the connectors and push until you hear a click
    • Weight: 13g
    • Filter retainer sold separately
  • Code:3M9600
    Discover…
    For use with the 3M Secure Click HF-800 Series of reusable half-face masks, these particulate and nuisance odour filters are simple to fit into place and are secured with an audible click so you can be sure they’re fitted correctly.

    Learn more…
    • Filter cartridges for use with the 3M Secure Click HF-800 and HF-800SD reusable half-face masks
    • Dual-flow construction allows for easier breathing
    • Protect against particulates, nuisance-level organic vapour and acid gas
    • Easy to fit into place; simply align the connectors and push until you hear a click
    • Weight: 21g
    • Filter retainer sold separately
  • Code:479901
    Discover…
    For use with the innovative JSP PowerCap Infinity powered respirator, this P3 particulate filter offers respiratory protection against toxic particles.

    Learn more…
    • Particulate filter offering respiratory protection against dusts, fumes, and oil- and water-based mists
    • For use with the JSP PowerCap Infinity powered respirator
    • High-efficiency filters
    • Always replace in pairs
    • Parts should be checked regularly for signs of wear and damage, and replaced when necessary

    Get technical…
    EN 12941:1998 + A2:2008 P3
  • Code:4853010
    Discover…
    This P3 particulate filter is for use with the Stealth half-face respirator mask. It offers respiratory protection against very fine particulate hazards including dusts, fumes and micro-organisms.

    Learn more…
    • Particulate filter offering respiratory protection against very fine, toxic dusts, fumes, oil- and water-based mists and micro-organisms such as bacteria and viruses
    • For use with the Stealth half-face respirator mask
    • Removes 99.999% of airborne particles at 0.3 microns and above
    • Parts should be checked regularly for signs of wear and damage, and replaced when necessary

    Get technical…
    EN 143 P3
  • Code:4T6300
    Discover…
    These glass fibre filters are for use with the Casella air-quality monitoring kit.

    Learn more…
    • Pre-weighed grade-A glass fibre
    • 25mm
    • For use with the Casella air-quality monitoring kit
  • Code:112000
    Discover…
    Part of the 6000 Series of filters, these 3M 6075 formaldehyde and A1 gas filters are for use with a wide range of 3M full-face and half-face masks. They offer respiratory protection against organic vapours and formaldehyde and are easy to click into place thanks to the bayonet connection.

    Learn more…
    • Protects against organic vapours with boiling points above 65°C and formaldehyde
    • For use with 3M half-face and full-face respirator masks
    • Bayonet connection with a simple twist-and-click fitting
    • Lightweight with low breathing resistance
    • Swept-back position maintains a good field of vision
    • Can be combined with a particulate filter
    • Maximum use concentration for full-face masks: 20 x workplace exposure limit (WEL) or 1000ppm whichever is lower for certain organic gases and 10ppm for formaldehyde
    • Maximum use concentration for half-face masks: 10 x workplace exposure limit (WEL) or 1000ppm whichever is lower for certain organic gases and 10ppm for formaldehyde

    Get technical…
    EN 14387 A1 + Form
  • Code:112100
    Discover…
    Part of the 6000 Series of filters, these 3M 6051 A1 organic vapour gas filters are for use with a wide range of 3M full-face and half-face masks. They offer respiratory protection against organic vapours and are easy to click into place thanks to the bayonet connection.

    Learn more…
    • Protects against organic vapours with boiling points above 65°C
    • For use with 3M half-face and full-face respirator masks
    • Bayonet connection with a simple twist-and-click fitting
    • Lightweight with low breathing resistance
    • Swept-back position maintains a good field of vision
    • Can be combined with a particulate filter
    • Maximum use concentration for full-face masks: 20 x workplace exposure limit (WEL) or 1000ppm whichever is lower for certain organic gases
    • Maximum use concentration for half-face masks: 10 x workplace exposure limit (WEL) or 1000ppm whichever is lower for certain organic gases

    Get technical…
    EN 14387 A1
  • Code:112200
    Discover…
    Part of the 6000 Series of filters, these 3M 6054 K1 ammonia filters are for use with a wide range of 3M full-face and half-face masks. They offer respiratory protection against ammonia and are easy to click into place thanks to the bayonet connection.

    Learn more…
    • Protects against ammonia and its derivatives
    • For use with 3M half-face and full-face respirator masks
    • Bayonet connection with a simple twist-and-click fitting
    • Lightweight with low breathing resistance
    • Swept-back position maintains a good field of vision
    • Can be combined with a particulate filter
    • Maximum use concentration for full-face masks: 20 x workplace exposure limit (WEL) or 1000ppm whichever is lower
    • Maximum use concentration for half-face masks: 10 x workplace exposure limit (WEL) or 1000ppm whichever is lower

    Get technical…
    EN 14387 K1
Nearby Stores