Skip to content Skip to navigation menu

Personal Protective Equipment

3,761 Results found

Display using
  • Category

  • Brand

  • Price Range

  • Code:1040400
    Discover…
    Stay warm in cold environments, even if you need to wear a hard hat, with this fleecy Arco safety helmet liner. It’s designed to be worn with the Arco Champion Plus safety helmet as part of a full cold-store clothing outfit.

    Learn more…
    • Polycotton outer with a fleece lining
    • Designed to fit between the cradle and helmet shell
    • Compatible with the Arco Champion Plus safety helmet
  • Code:1052700
    Discover…
    PULSAR P346 hi-vis cargo trousers are constructed to ensure you remain noticeable as well as comfortable throughout even the longest shifts. Combining safety, style and functionality, these trousers feature reflective tape, a genuine Teflon-coating and twin-needle stitching at stress points to ensure durability. There are also plenty of pockets so you have space for all your essentials while you're on the go.

    Learn more…
    • Hi-vis cargo trousers
    • Crafted from tough 275g/m² fabric (80% polyester, 20% cotton)
    • Teflon-coating not only resists dirt but provides water repellence in light showers
    • Twin-needle stitched and bar tacked at stress points with a triple-stitched inseam for added durability
    • Features double-stitched reflective tape
    • Multiple pockets including a rear patch pocket and two combat-style pockets on legs
    • Kneepad pockets
    • Partially elasticated waistband for a flexible fit
    • Expanding, adjustable belt loops allows both standard and utility belt to be worn at once
    • Can be washed domestically at 40°C

    Get technical…
    EN 20471:2013 Class 2

    Available in…
    Short (29in inside leg): 28-54in waist
    Regular (31in inside leg): 28-54in waist
    Tall (33in inside leg): 28-54in waist

    Great for…
    Construction / utilities / infrastructure
  • Code:110300
    Discover…
    Designed for tough and dirty work environments, the 3M 6500 half-face respirator mask helps you to stay productive and protected. No need to remove your safety helmet or face shield whilst moving in and out of contaminated areas, with its Quick Latch drop-down mechanism, this half mask is easily lowered or raised. Comfortable and durable, the resilient silicone face seal is soft but firm while the 3M Cool Flow exhalation valve cover helps to direct exhaled breath and moisture downward for comfortable reduction of fogging.

    Learn more…
    • Low-profile design offers wide field of vision and better compatibility with welding/grinding shields
    • Bayonet connection fitting system fits a broad range of particulate, gas and vapour filters
    • Soft, yet durable silicone face seal helps provide comfort and stability
    • Cool Flow valve lowers breathing resistance and reduces heat and moisture build-up
    • Exhalation valve cover helps direct exhaled breath and moisture away from face
    • Adjustable head harness for a great fit
    • Quick Latch drop-down mechanism makes it easy to put on and take off
    • Compatible with hard hats, hearing protection and other PPE

    Get technical…
    EN 140:1998

    Available in…
    Sizes S-L
  • Code:110700
    Discover…
    Ideal for use in manual sanding applications, these 3M 8710E dust masks offer respiratory protection against low-level, non-hazardous dusts. They’re easy to use with colour-coded twin straps that easily slip into place, providing a great fit around the face.

    Learn more…
    • Disposable respirator with adjustable nose clip
    • Protects against low-level, non-hazardous dusts and oil- or water-based mists
    • Sturdy inner shell and convex shape avoids collapsing in
    • Colour-coded twin straps to hold mask in place
    • Easy to use with a good, comfortable seal
    • Latex-free

    Get technical…
    EN 149:2001+A1:2014 FFP1
    Assigned protection factor (APF): 4

    Great for…
    Manual sanding / joinery / DIY
  • Code:111500
    Discover…
    Designed to provide economical respiratory protection in industrial environments, the 3M 6000 half-face respirator mask helps you to stay productive and protected. The lightweight elastomeric facepiece is comfortable to wear while the cradle harness and neck strap make it easy to take on and off. It’s easy to care for and requires little maintenance so it’s ideal for less demanding applications that require a cost-effective solution.

    Learn more…
    • Reusable half-face mask
    • Low-maintenance and economical
    • Lightweight elastomeric material offers comfort during long periods of wear
    • Cradle head harness and neck strap are comfortable and easy to fasten
    • Low-profile design offers a good field of vision and allows compatibility with other PPE
    • Twin-filter model distributes weight evenly
    • Bayonet-style connection for use with a wide range of filters
    • Can protect against gases, vapours and particulates depending on chosen filter
    • Compatible with 3M 2000, 5000 and 6000 Series filters (available separately)
    • Weight: 82g

    Get technical…
    EN 140:1998

    Available in…
    Sizes S-L
  • Code:111400
    Discover…
    Designed to provide lightweight respiratory protection in industrial environments, the 3M 6000 full-face respirator mask helps you to stay productive and protected. The soft silicone facepiece is comfortable to wear while the four-strap harness makes it easy to take on and off. With a large polycarbonate visor this 3M mask also offers face protection and a wide field of vision.

    Learn more…
    • Soft silicone mask for comfort and easy wearing
    • Four-strap harness is easy to put on and take off
    • Large polycarbonate lens offers a wide field of vision and resistance to impact
    • Cool Flow valve lowers breathing resistance and reduces heat and moisture build-up
    • Bayonet connection fitting system fits a broad range of particulate, gas and vapour filters

    Get technical…
    EN 136:1998 Class 1
    EN 166 B

    Available in…
    S-L
  • Code:112000
    Discover…
    Part of the 6000 Series of filters, these 3M 6075 formaldehyde and A1 gas filters are for use with a wide range of 3M full-face and half-face masks. They offer respiratory protection against organic vapours and formaldehyde and are easy to click into place thanks to the bayonet connection.

    Learn more…
    • Protects against organic vapours with boiling points above 65°C and formaldehyde
    • For use with 3M half-face and full-face respirator masks
    • Bayonet connection with a simple twist-and-click fitting
    • Lightweight with low breathing resistance
    • Swept-back position maintains a good field of vision
    • Can be combined with a particulate filter
    • Maximum use concentration for full-face masks: 20 x workplace exposure limit (WEL) or 1000ppm whichever is lower for certain organic gases and 10ppm for formaldehyde
    • Maximum use concentration for half-face masks: 10 x workplace exposure limit (WEL) or 1000ppm whichever is lower for certain organic gases and 10ppm for formaldehyde

    Get technical…
    EN 14387 A1 + Form
  • Code:112100
    Discover…
    Part of the 6000 Series of filters, these 3M 6051 A1 organic vapour gas filters are for use with a wide range of 3M full-face and half-face masks. They offer respiratory protection against organic vapours and are easy to click into place thanks to the bayonet connection.

    Learn more…
    • Protects against organic vapours with boiling points above 65°C
    • For use with 3M half-face and full-face respirator masks
    • Bayonet connection with a simple twist-and-click fitting
    • Lightweight with low breathing resistance
    • Swept-back position maintains a good field of vision
    • Can be combined with a particulate filter
    • Maximum use concentration for full-face masks: 20 x workplace exposure limit (WEL) or 1000ppm whichever is lower for certain organic gases
    • Maximum use concentration for half-face masks: 10 x workplace exposure limit (WEL) or 1000ppm whichever is lower for certain organic gases

    Get technical…
    EN 14387 A1
  • Code:112200
    Discover…
    Part of the 6000 Series of filters, these 3M 6054 K1 ammonia filters are for use with a wide range of 3M full-face and half-face masks. They offer respiratory protection against ammonia and are easy to click into place thanks to the bayonet connection.

    Learn more…
    • Protects against ammonia and its derivatives
    • For use with 3M half-face and full-face respirator masks
    • Bayonet connection with a simple twist-and-click fitting
    • Lightweight with low breathing resistance
    • Swept-back position maintains a good field of vision
    • Can be combined with a particulate filter
    • Maximum use concentration for full-face masks: 20 x workplace exposure limit (WEL) or 1000ppm whichever is lower
    • Maximum use concentration for half-face masks: 10 x workplace exposure limit (WEL) or 1000ppm whichever is lower

    Get technical…
    EN 14387 K1
  • Code:112300
    Discover…
    Part of the 6000 Series of filters, these 3M 6057 ABE1 combination gas filters are for use with a wide range of 3M full-face and half-face masks. They offer respiratory protection against organic, inorganic and acid gases, and are easy to click into place thanks to the bayonet connection.

    Learn more…
    • Protects against organic vapours with boiling points above 65°C, and inorganic and acid gas
    • For use with 3M half-face and full-face respirator masks
    • Bayonet connection with a simple twist-and-click fitting
    • Lightweight with low breathing resistance
    • Swept-back position maintains a good field of vision
    • Can be combined with a particulate filter
    • Maximum use concentration for full-face masks: 20 x workplace exposure limit (WEL) or 1000ppm whichever is lower
    • Maximum use concentration for half-face masks: 10 x workplace exposure limit (WEL) or 1000ppm whichever is lower

    Get technical…
    EN 14387 ABE1
  • Code:112400
    Discover…
    Part of the 6000 Series of filters, these 3M 6055 A2 organic vapour filters are for use with a wide range of 3M full-face and half-face masks. They offer respiratory protection against certain organic vapours and are easy to click into place thanks to the bayonet connection.

    Learn more…
    • Protects against organic vapours with boiling points above 65°C
    • For use with 3M half-face and full-face respirator masks
    • Bayonet connection with a simple twist-and-click fitting
    • Lightweight with low breathing resistance
    • Swept-back position maintains a good field of vision
    • Can be combined with a particulate filter
    • Maximum use concentration for full-face masks: 20 x workplace exposure limit (WEL) or 5000ppm whichever is lower
    • Maximum use concentration for half-face masks: 10 x workplace exposure limit (WEL) or 5000ppm whichever is lower

    Get technical…
    EN 14387 A2
  • Code:112600
    Discover…
    Part of the 2000 Series of filters, these 3M 2128 P2 R particulate filters are for use with a wide range of 3M full-face and half-face masks and are easy to click into place thanks to the bayonet connection. They offer respiratory protection against fine dusts, and oil- and water-based mists, plus relief from nuisance levels of organic vapours, acid gas, and ozone.

    Learn more…
    • Protects against fine dusts, and oil- and water-based mists
    • Also offers relief from nuisance levels of organic vapour, acid gas and ozone
    • For use with 3M half-face and full-face respirator masks
    • Bayonet connection with a simple twist-and-click fitting
    • Lightweight with low breathing resistance
    • Flexible enough to fit under welding shields
    • Maximum use concentration: 10 x workplace exposure limit (WEL) for particulates, up to 10 x WEL for ozone, and below WEL for vapours and gases

    Get technical…
    EN 143 P2 R
Nearby Stores