Skip to content Skip to navigation menu

Personal Protective Equipment

4,264 Results found

Display using
  • Category

  • Brand

  • Environmental Claim

  • Price Range

  • Code:112600
    Discover…
    Part of the 2000 Series of filters, these 3M 2128 P2 R particulate filters are for use with a wide range of 3M full-face and half-face masks and are easy to click into place thanks to the bayonet connection. They offer respiratory protection against fine dusts, and oil- and water-based mists, plus relief from nuisance levels of organic vapours, acid gas, and ozone.

    Learn more…
    • Protects against fine dusts, and oil- and water-based mists
    • Also offers relief from nuisance levels of organic vapour, acid gas and ozone
    • For use with 3M half-face and full-face respirator masks
    • Bayonet connection with a simple twist-and-click fitting
    • Lightweight with low breathing resistance
    • Flexible enough to fit under welding shields
    • Maximum use concentration: 10 x workplace exposure limit (WEL) for particulates, up to 10 x WEL for ozone, and below WEL for vapours and gases

    Get technical…
    EN 143 P2 R
  • Code:112500
    Discover…
    Part of the 2000 Series of filters, these 3M 2125 P2 R particulate filters are for use with a wide range of 3M full-face and half-face masks. They offer respiratory protection against fine dusts, and oil- and water-based mists, and they’re easy to click into place thanks to the bayonet connection.

    Learn more…
    • Protects against fine dusts, and oil- and water-based mists
    • For use with 3M half-face and full-face respirator masks
    • Bayonet connection with a simple twist-and-click fitting
    • Lightweight with low breathing resistance
    • Flexible enough to fit under welding shields
    • Maximum use concentration: 10 x workplace exposure limit (WEL)

    Get technical…
    EN 143 P2 R
  • Code:112700
    Discover…
    Part of the 2000 Series of filters, these 3M 2135 P3 R particulate filters are for use with a wide range of 3M full-face and half-face masks. They offer respiratory protection against fine dusts, and oil- and water-based mists, and they’re easy to click into place thanks to the bayonet connection.

    Learn more…
    • Protects against fine dusts, and oil- and water-based mists
    • For use with 3M half-face and full-face respirator masks
    • Bayonet connection with a simple twist-and-click fitting
    • Lightweight with low breathing resistance
    • Flexible enough to fit under welding shields
    • Maximum use concentration for full-face masks: 40 x workplace exposure limit (WEL)
    • Maximum use concentration for half-face masks: 20 x workplace exposure limit (WEL)

    Get technical…
    EN 143 P3 R
  • Code:112800
    Discover…
    Part of the 6000 Series of filters, these 3M 6098 AXP3 R organic vapour and particulate filters are for use with a wide range of 3M full-face masks and are easy to click into place thanks to the bayonet connection. They offer respiratory protection against certain organic vapours and airborne particulates.

    Learn more…
    • Protects against certain organic vapours with boiling points below 65°C, and airborne particles
    • For use with 3M full-face respirator masks only (not suitable for half masks)
    • Bayonet connection with a simple twist-and-click fitting
    • Lightweight with low breathing resistance
    • Swept-back position maintains a good field of vision
    • Maximum use concentration depends on particular low-boiling-point gas

    Get technical…
    EN 14387:2004 + A1:2008 AXP3 R
  • Code:112900
    Discover…
    Finding head protection that’s secure and comfortable when working at height is key. This 3M SecureFit safety helmet features a highly adjustable ratchet harness with inbuilt 3M Pressure Diffusion Technology to reduce pressure on the forehead by up to 20% compared to other, more conventional hard hats. It protects against falling objects and bumps to the head in an industrial setting but takes inspiration from climbing helmets with its lack of a brim giving clear upward vision.

    Learn more…
    • Secure, comfortable UV-stabilised ABS safety helmet
    • Four-point ratchet suspension harness with 3M Pressure Diffusion Technology to reduce up to 20% of forehead pressure compared to standard helmet suspensions
    • Uvicator sensor disc shows when your hard hat has been exposed to ultraviolet radiation and needs replacing
    • Suitable for use down to -30°C
    • Provides lateral deformation protection
    • Protection against molten metal splash
    • Optional vents for optimal airflow
    • Accessory slots are compatible with 3M face shields, ear defenders and other PPE
    • Fits sizes 50-63cm
    • Weight: 575g

    Get technical…
    EN 397:2012 LD -30°C MM
    EN 50365:2002

    Great for…
    Construction / forestry / oil and gas
  • Code:113200
    Discover…
    Ideal for use in manual sanding applications, these 3M 8812 dust masks offer respiratory protection against low-level, non-hazardous dusts. They’re easy to use with colour-coded twin straps that easily slip into place, providing a great fit around the face. These face masks also feature a 3M Cool Flow valve to reduce heat build-up and keep the wearer cool and comfortable.

    Learn more…
    • Cup-shaped disposable respirator with adjustable nose clip
    • 3M Cool Flow valve reduces heat build-up inside the respirator for comfort
    • Protects against low-level, non-hazardous dusts and oil- or water-based mists
    • Sturdy inner shell and convex shape avoids collapsing in
    • Colour-coded twin straps to hold mask in place
    • Easy to use with a good, comfortable seal

    Get technical…
    EN 149:2001 + A1:2014 FFP1
    Assigned protection factor (APF): 4

    Great for…
    Manual sanding / joinery / DIY
  • Code:113300
    Discover…
    Ideal for use in a variety of sanding applications, these 3M 8822 dust masks offer respiratory protection against medium-level dusts such as those found when working with cement, wood and steel. They’re easy to use with colour-coded twin straps that easily slip into place, providing a great fit around the face. These face masks also feature a 3M Cool Flow valve to reduce heat build-up and keep the wearer cool and comfortable.

    Learn more…
    • Cup-shaped disposable respirator with adjustable nose clip
    • 3M Cool Flow valve reduces heat build-up inside the respirator for comfort
    • Protects against medium-level, fine dusts and oil- or water-based mists
    • Sturdy inner shell and convex shape avoids collapsing in
    • Colour-coded twin straps to hold mask in place
    • Easy to use with a good, comfortable seal
    • Latex-free
    • Compatible with eye and hearing protection

    Get technical…
    EN 149:2001 + A1:2010 FFP2
    Assigned protection factor (APF): 10

    Great for…
    Manual sanding / drilling / sawing / joinery / DIY
  • Code:1133500
    Discover…
    It’s not just hi-vis clothing that helps keep you safe and seen at work. These Brightboot waterproof safety boots are manufactured from a high-visibility rubber to keep feet dry and enhance the wearer’s visibility when on site in low light. With tough aramid penetration-resistant midsoles and fibreglass protective toecaps, these safety wellies are non-metallic too which makes them perfect for metal-free areas, while the moisture-wicking lining draws heat and moisture away from the feet to keep you cool and comfortable over a long working day.

    Learn more…
    • Safety wellies manufactured from waterproof hi-vis rubber
    • 100% non-metallic and anti-magnetic
    • Moisture-wicking fibre network draws perspiration away from the foot to keep wearer cool
    • Insulated against heat up to 150°C
    • 5mm thermally insulating neoprene sock liner insulates down to -25°C
    • Resistant to jet washers
    • Suitable for vegans
    • Aramid fibre penetration-resistant midsoles and fibreglass protective toecaps
    • Resistant to oils, fats and oleic acid
    • Outsoles are heat-resistant up to 300°C for 60 seconds
    • Technical footbeds and energy-absorbing heels deliver outstanding wearer comfort and reduce fatigue
    • Slip-resistant outsoles
    • Antistatic

    Get technical…
    EN 20345:2011 S5 CI FO HI HRO
    Slip rating: SRA

    Great for…
    Construction / transport / oil and gas / utilities / facilities management/ mining / industrial cleaning / surveying / recycling and waste management / groundworks / landscaping
  • Code:113400
    Discover…
    Part of the 2000 Series of filters, these 3M 2138 P3 R particulate filters are for use with a wide range of 3M full-face and half-face masks and are easy to click into place thanks to the bayonet connection. They offer respiratory protection against fine dusts, and oil- and water-based mists, plus relief from nuisance levels of organic vapours, acid gas, and ozone.

    Learn more…
    • Protects against fine dusts, and oil- and water-based mists
    • Also offers relief from nuisance levels of organic vapour, acid gas and ozone
    • For use with 3M half-face and full-face respirator masks
    • Bayonet connection with a simple twist-and-click fitting
    • Lightweight with low breathing resistance
    • Flexible enough to fit under welding shields
    • Maximum use concentration for full-face masks: 40 x workplace exposure limit (WEL) for particulates, up to 10 x WEL for ozone, and below WEL for vapours and gases
    • Maximum use concentration for half-face masks: 20 x workplace exposure limit (WEL) for particulates, up to 10 x WEL for ozone, and below WEL for vapours and gases

    Get technical…
    EN 143 P3 R
  • Code:113500
    Discover…
    Ideal for use in a variety of sanding applications, these 3M 8810 dust masks offer respiratory protection against medium-level dusts such as those found when working with cement, wood and steel. They’re easy to use with colour-coded twin straps that easily slip into place, providing a great fit around the face.

    Learn more…
    • Cup-shaped disposable respirator with adjustable nose clip
    • Protects against medium-level, fine dusts and oil- or water-based mists
    • Sturdy inner shell and convex shape avoids collapsing in
    • Colour-coded twin straps to hold mask in place
    • Easy to use with a good, comfortable seal
    • Latex-free
    • Compatible with eye and hearing protection

    Get technical…
    EN 149:2001 + A1:2010 FFP2
    Assigned protection factor (APF): 10

    Great for…
    Manual sanding / drilling / sawing / joinery / DIY
  • Code:113800
    Discover…
    Part of the 6000 Series of filters, these 3M 6035 encapsulated P3 R particulate filters are for use with a wide range of 3M full-face and half-face masks and are easy to click into place thanks to the bayonet connection. They offer respiratory protection against solid and liquid particles, and they’re encapsulated in a robust plastic case for easy cleaning.

    Learn more…
    • Protects against solid and liquid particulates
    • For use with 3M half-face and full-face respirator masks
    • Encapsulated in robust plastic case so they can be wiped clean
    • Bayonet connection with a simple twist-and-click fitting
    • Innovative design allows you to check the seal by a simple squeeze of the filters
    • Lightweight with low breathing resistance
    • Maximum use concentration for full-face masks: 40 x workplace exposure limit (WEL)
    • Maximum use concentration for half-face masks: 20 x workplace exposure limit (WEL)

    Get technical…
    EN 143 P3 R
  • Code:114100
    Discover…
    Part of the 6000 Series of filters, these 3M 6038 encapsulated P3 R particulate and hydrogen fluoride filters are for use with a wide range of 3M full-face and half-face masks and are easy to click into place thanks to the bayonet connection and are encapsulated in a robust plastic case for easy cleaning. They offer respiratory protection against solid and liquid particles, and hydrogen fluoride, plus relief from nuisance-level organic vapours and acid gas.

    Learn more…
    • Protects against solid and liquid particulates, and hydrogen fluoride
    • Offers relief from nuisance-level organic vapours and acid gas
    • For use with 3M half-face and full-face respirator masks
    • Encapsulated in robust plastic case so they can be wiped clean
    • Bayonet connection with a simple twist-and-click fitting
    • Innovative design allows you to check the seal by a simple squeeze of the filters
    • Lightweight with low breathing resistance
    • Maximum use concentration for full-face masks: 40 x workplace exposure limit (WEL) for particulate and up to 30ppm for hydrogen fluoride
    • Maximum use concentration for half-face masks: 20 x workplace exposure limit (WEL) for particulate and up to 30ppm for hydrogen fluoride

    Get technical…
    EN 143 P3 R + HF
Nearby Stores