Skip to content Skip to navigation menu

Traffic Cones & Speed Restrictors

33 Results found

Display using
  • Category

  • Brand

  • Colour

  • Price Range

  • Code:5637613
    Discover...
    These Vulcascot Snap Fit modules combine the traffic-calming nature of a speed bump with the fortification of a cable protector. Able to house cable bundles up to 27mm x 56mm, these units come in four different sizes to cater for your needs.

    Learn more...
    • Rugged traffic calming cable protectors
    • UV-stabilised for an extended outdoor life
    • Crafted from flame-retardant polymers
    • Can house power or cable bundles up to 56mm x 27mm
    • Highly visible yellow stripes designed to draw attention
    • No drilling or bolting required for installation

    Get technical...
    BS 476 Part 7 Class 3
    BS 903-C5, 500V

    Available in...
    TTC/1 (30mm x 130mm x 4.5m)
    TTC/2 (40mm x 180mm x 4.5m)
    TTC/3 (68mm x 270mm x 1.5m)
    TTC/4 (35mm x 248mm x 1.5m)
  • Code:5700805
    Discover...
    JSP Ridgeback speed bumps are supplied in single modules that are designed to interlock with each other to ensure you can make bespoke lengths that aim to reduce vehicle speed and improve safety in residential and commercial areas. These endcaps are designed to finish off the speed bump at both ends and feature distinctive thermoplastic retro-reflective elements with glass beads that work to improve visibility when a vehicle is approaching.

    Learn more...
    • Speed ramp endcap
    • Aims to improve road safety in residential and commercial areas
    • Distinctive design, with retro-reflective elements that work to improve visibility
    • Feature a channel on the underside to accommodate cables
    • Interlocks with Ridgeback speed bumps of the same size
    • Speed bump modules available separately

    Get technical...
    BS EN 1436:2018
    BS EN 1824:2011

    Available in...
    5mph (7.5cm x 20cm x 40cm) / 10mph (5cm x 20cm x 40cm)
  • Code:5700905
    Discover...
    JSP Ridgeback speed bumps are supplied in single modules that are designed to interlock with each other and corresponding endcaps, to ensure you can make bespoke lengths that aim to reduce vehicle speed and improve safety in residential and commercial areas. Each module features distinctive thermoplastic retro-reflective elements with glass beads that work to improve visibility when a vehicle is approaching.

    Learn more...
    • Speed ramp designed to reduce vehicle speed on roads
    • Aims to improve safety in residential and commercial areas
    • Distinctive design, with retro-reflective elements that work to improve visibility
    • Interlocks with other modules of the same size and Ridgeback endcaps
    • Endcaps available separately

    Get technical...
    BS EN 1436:2018
    BS EN 1824:2011

    Available in...
    5mph (7.5cm x 50cm x 40cm) / 10mph (5cm x 50cm x 40cm)
  • Code:5705270
    Discover...
    TRAFFIC-LINE Easy-Rider speed bumps are modules designed to interlock with each other so you can create bespoke speed restrictors that aim to reduce vehicle speed and improve safety. Each ramp is crafted from recycled rubber and features yellow reflective tape for added visibility, as well as channels in the base that allow for the passage of rainwater or for cables to be guided through if necessary.

    Learn more...
    • Speed bumps crafted from recycled rubber
    • Flexible nature of the product enables it to conform to most road surfaces
    • Yellow reflective tape and ‘cat’s eyes’ make each module highly visible
    • Two 30mm channels which facilitate drainage and can accommodate cables or hoses if required
    • Endcaps available separately
    • Dimensions: 305mm x 1800mm

    Available in...
    5mph: 70mm
    10mph: 56mm
  • Code:5705276
    Discover...
    SafeRide speed bumps are wide modules designed to interlock with each other so you can create bespoke speed restrictors that aim to reduce vehicle speed and improve safety, all without compromising on crossing comfort. These endcaps are designed to finish off the speed ramp so you have a complete system.

    Learn more...
    • Speed bump endcaps crafted from rubber
    • Wide drive-over section reduces the ramp angle, ensuring a comfortable crossing
    • Centres available separately
    • Width: 500mm x 450mm

    Available in...
    5mph: 75mm
    10mph: 50mm

    Great for...
    Airports / docks / container ports / car parks / entrances and exits / open spaces / loading docks / public areas / hospitals
  • Code:5705277
    Discover...
    SafeRide speed bumps are wide modules designed to interlock with each other so you can create bespoke speed restrictors that aim to reduce vehicle speed and improve safety, all without compromising on crossing comfort. These endcaps are designed to finish off the speed ramp so you have a complete system.

    Learn more...
    • Speed bump endcaps crafted from rubber
    • Wide drive-over section reduces the ramp angle, ensuring a comfortable crossing
    • Centres available separately
    • Width: 500mm x 450mm

    Available in...
    5mph: 75mm
    10mph: 50mm

    Great for...
    Airports / docks / container ports / car parks / entrances and exits / open spaces / loading docks / public areas / hospitals
  • Code:5712400
    Discover...
    These Melba Swintex Bigfoot two-piece traffic cones are ideal for both vehicle and pedestrian traffic management in a variety of environments. Due to their recycled polypropylene and PVC construction, each of these cones is resistant to cold, impacts and breakage, ensuring they are strong and durable.

    Learn more...
    • Blow-moulded top is crafted from recycled low-density polypropylene that is resistant to cold, impacts and breaks
    • The base is 100% recyclable thermoplastic PVC with slip-resistant properties
    • Cones can be stacked with the bases on to prevent tops of the cones touching

    Get technical...
    BS EN 13422:2004

    Available in...
    500mm / 750mm / 1m
  • Code:5719215
    Discover...
    These Melba Swintex Mastercone traffic cones feature a top fashioned from strong LPDE and HDPE, as well as a sturdy base made from 100% recycled PVC. A Starlux sleeve is wrapped around the centre of each of the cones to provide a reflective surface for illumination by lights in the dark.

    Learn more...
    • Traffic cone crafted from a blow-moulded top with a 100% recycled PVC base
    • Ideal for redirecting traffic in a safe manner
    • Easy to clean when necessary
    • Supplied with a Starlux prismatic reflective sleeve

    Get technical...
    BS EN 13422: 2004

    Available in...
    500mm / 750mm / 1m
  • Code:5721110
    Discover...
    These replacement Melba Swintex traffic cone sleeves are designed to be wrapped around the centre of Mastercones to provide a reflective surface for illumination by lights in the dark.

    Learn more...
    • Replacement reflective cone sleeves to fit 750mm and 1m Mastercone sleeves
    • Easy to clean when necessary

    Available in...
    For 750mm cones / for 1m cones
  • Code:5721100
    Discover...
    These Melba Swintex MLP traffic cones are fashioned from robust, recyclable thermoplastic, with a Starlux sleeve wrapped around the centre that provides a reflective surface for illumination by lights in the dark.

    Learn more...
    • Traffic cone crafted from thermoplastic
    • Ideal for redirecting traffic in a safe manner
    • Easy to clean when necessary
    • Supplied with a D2 Starlux prismatic reflective sleeve
    • 100% recyclable

    Get technical...
    BS EN 13422: 2004

    Available in...
    500mm / 750mm
  • Code:5705271
    Discover...
    TRAFFIC-LINE Easy-Rider speed bumps are modules designed to interlock with each other so you can create bespoke speed restrictors that aim to reduce vehicle speed and improve safety. This endcap is designed to finish off the speed restrictor, ensuring you have a complete set.

    Learn more...
    • Speed bump endcap crafted from recycled rubber
    • Flexible nature of the product enables it to conform to most road surfaces
    • Centre modules available separately
    • Dimensions: 225mm x 305mm x 56mm
  • Code:5705274
    Discover...
    SafeRide speed bumps are wide modules designed to interlock with each other so you can create bespoke speed restrictors that aim to reduce vehicle speed and improve safety, all without compromising on crossing comfort. Each ramp is crafted from recycled rubber and features yellow retro-reflective panels for added visibility.

    Learn more...
    • Speed bumps crafted from rubber
    • Wide drive-over section reduces the ramp angle, ensuring a comfortable crossing
    • Yellow retro-reflective panels make each module highly visible
    • Surface pattern for effective grip, even when wet
    • Suitable for HGVs
    • Endcaps available separately
    • Width: 500mm x 900mm

    Available in...
    5mph: 75mm
    10mph: 50mm

    Great for...
    Airports / docks / container ports / car parks / entrances and exits / open spaces / loading docks / public areas / hospitals
Nearby Stores