Skip to content Skip to navigation menu

Traffic Cones & Speed Restrictors

33 Results found

Display using
  • Category

  • Brand

  • Colour

  • Price Range

  • Code:4E6700
    Discover...
    The JSP Maxilite LED lamp provides bright, versatile and long-lasting light in challenging areas with no power supplies. It can be attached to barriers and cones simply by using a compatible bracket, and you can use a hex key for function selection. Functions include a static beam, as well as a flashing light that flashes between 65 and 85 times per minute.

    Learn more...
    • Bright, long-lasting dual function lamp
    • Crafted largely from polypropylene
    • Polycarbonate lens with a polypropylene outer
    • Features a plastic handle for easy transportation
    • Head can swivel a full 360°
    • Functions include flashing (65-85 flashes per minute) and static
    • Supplied with a hex key for assembly and selecting functions
    • Extended battery life provided by two 6V batteries
    • Can be attached to cones and barriers using the compatible bracket, available separately

    Get technical...
    BS 3143 Part 2
    EN 12352
  • Code:4E6800
    Discover...
    The JSP Microlite hazard lamp provides bright, versatile and long-lasting light in challenging areas with no power supply. It can be attached to barriers and cones simply by using the integral loop, and the bulb will flash between 65 and 85 per minute when switched on.

    Learn more...
    • Bright, long-lasting flashing hazard lamp
    • Crafted largely from polypropylene
    • Features a hanging loop for carrying or attaching to barriers and cones
    • Emits lights from the full 360° lens
    • 65-85 flashes per minute
    • Extended battery life provided by one 6V battery
    • Dimensions: 100mm x 90mm
    • Weight: 175g

    Get technical...
    BS 3143 Part 2
    EN 12352: 2006
  • Code:5637613
    Discover...
    These Vulcascot Snap Fit modules combine the traffic-calming nature of a speed bump with the fortification of a cable protector. Able to house cable bundles up to 27mm x 56mm, these units come in four different sizes to cater for your needs.

    Learn more...
    • Rugged traffic calming cable protectors
    • UV-stabilised for an extended outdoor life
    • Crafted from flame-retardant polymers
    • Can house power or cable bundles up to 56mm x 27mm
    • Highly visible yellow stripes designed to draw attention
    • No drilling or bolting required for installation

    Get technical...
    BS 476 Part 7 Class 3
    BS 903-C5, 500V

    Available in...
    TTC/1 (30mm x 130mm x 4.5m)
    TTC/2 (40mm x 180mm x 4.5m)
    TTC/3 (68mm x 270mm x 1.5m)
    TTC/4 (35mm x 248mm x 1.5m)
  • Code:5700805
    Discover...
    JSP Ridgeback speed bumps are supplied in single modules that are designed to interlock with each other to ensure you can make bespoke lengths that aim to reduce vehicle speed and improve safety in residential and commercial areas. These endcaps are designed to finish off the speed bump at both ends and feature distinctive thermoplastic retro-reflective elements with glass beads that work to improve visibility when a vehicle is approaching.

    Learn more...
    • Speed ramp endcap
    • Aims to improve road safety in residential and commercial areas
    • Distinctive design, with retro-reflective elements that work to improve visibility
    • Feature a channel on the underside to accommodate cables
    • Interlocks with Ridgeback speed bumps of the same size
    • Speed bump modules available separately

    Get technical...
    BS EN 1436:2018
    BS EN 1824:2011

    Available in...
    5mph (7.5cm x 20cm x 40cm) / 10mph (5cm x 20cm x 40cm)
  • Code:5700905
    Discover...
    JSP Ridgeback speed bumps are supplied in single modules that are designed to interlock with each other and corresponding endcaps, to ensure you can make bespoke lengths that aim to reduce vehicle speed and improve safety in residential and commercial areas. Each module features distinctive thermoplastic retro-reflective elements with glass beads that work to improve visibility when a vehicle is approaching.

    Learn more...
    • Speed ramp designed to reduce vehicle speed on roads
    • Aims to improve safety in residential and commercial areas
    • Distinctive design, with retro-reflective elements that work to improve visibility
    • Interlocks with other modules of the same size and Ridgeback endcaps
    • Endcaps available separately

    Get technical...
    BS EN 1436:2018
    BS EN 1824:2011

    Available in...
    5mph (7.5cm x 50cm x 40cm) / 10mph (5cm x 50cm x 40cm)
  • Code:5705270
    Discover...
    TRAFFIC-LINE Easy-Rider speed bumps are modules designed to interlock with each other so you can create bespoke speed restrictors that aim to reduce vehicle speed and improve safety. Each ramp is crafted from recycled rubber and features yellow reflective tape for added visibility, as well as channels in the base that allow for the passage of rainwater or for cables to be guided through if necessary.

    Learn more...
    • Speed bumps crafted from recycled rubber
    • Flexible nature of the product enables it to conform to most road surfaces
    • Yellow reflective tape and ‘cat’s eyes’ make each module highly visible
    • Two 30mm channels which facilitate drainage and can accommodate cables or hoses if required
    • Endcaps available separately
    • Dimensions: 305mm x 1800mm

    Available in...
    5mph: 70mm
    10mph: 56mm
  • Code:5705271
    Discover...
    TRAFFIC-LINE Easy-Rider speed bumps are modules designed to interlock with each other so you can create bespoke speed restrictors that aim to reduce vehicle speed and improve safety. This endcap is designed to finish off the speed restrictor, ensuring you have a complete set.

    Learn more...
    • Speed bump endcap crafted from recycled rubber
    • Flexible nature of the product enables it to conform to most road surfaces
    • Centre modules available separately
    • Dimensions: 225mm x 305mm x 56mm
  • Code:5705274
    Discover...
    SafeRide speed bumps are wide modules designed to interlock with each other so you can create bespoke speed restrictors that aim to reduce vehicle speed and improve safety, all without compromising on crossing comfort. Each ramp is crafted from recycled rubber and features yellow retro-reflective panels for added visibility.

    Learn more...
    • Speed bumps crafted from rubber
    • Wide drive-over section reduces the ramp angle, ensuring a comfortable crossing
    • Yellow retro-reflective panels make each module highly visible
    • Surface pattern for effective grip, even when wet
    • Suitable for HGVs
    • Endcaps available separately
    • Width: 500mm x 900mm

    Available in...
    5mph: 75mm
    10mph: 50mm

    Great for...
    Airports / docks / container ports / car parks / entrances and exits / open spaces / loading docks / public areas / hospitals
  • Code:5705273
    Discover...
    TRAFFIC-LINE Easy-Rider speed bumps are modules designed to interlock with each other so you can create bespoke speed restrictors that aim to reduce vehicle speed and improve safety. This endcap is designed to finish off the speed restrictor, ensuring you have a complete set.

    Learn more...
    • Speed bump endcap crafted from recycled rubber
    • Flexible nature of the product enables it to conform to most road surfaces
    • Centre modules available separately
    • Dimensions: 225mm x 305mm x 70mm
  • Code:5705276
    Discover...
    SafeRide speed bumps are wide modules designed to interlock with each other so you can create bespoke speed restrictors that aim to reduce vehicle speed and improve safety, all without compromising on crossing comfort. These endcaps are designed to finish off the speed ramp so you have a complete system.

    Learn more...
    • Speed bump endcaps crafted from rubber
    • Wide drive-over section reduces the ramp angle, ensuring a comfortable crossing
    • Centres available separately
    • Width: 500mm x 450mm

    Available in...
    5mph: 75mm
    10mph: 50mm

    Great for...
    Airports / docks / container ports / car parks / entrances and exits / open spaces / loading docks / public areas / hospitals
  • Code:5705277
    Discover...
    SafeRide speed bumps are wide modules designed to interlock with each other so you can create bespoke speed restrictors that aim to reduce vehicle speed and improve safety, all without compromising on crossing comfort. These endcaps are designed to finish off the speed ramp so you have a complete system.

    Learn more...
    • Speed bump endcaps crafted from rubber
    • Wide drive-over section reduces the ramp angle, ensuring a comfortable crossing
    • Centres available separately
    • Width: 500mm x 450mm

    Available in...
    5mph: 75mm
    10mph: 50mm

    Great for...
    Airports / docks / container ports / car parks / entrances and exits / open spaces / loading docks / public areas / hospitals
  • Code:5712400
    Discover...
    These Melba Swintex Bigfoot two-piece traffic cones are ideal for both vehicle and pedestrian traffic management in a variety of environments. Due to their recycled polypropylene and PVC construction, each of these cones is resistant to cold, impacts and breakage, ensuring they are strong and durable.

    Learn more...
    • Blow-moulded top is crafted from recycled low-density polypropylene that is resistant to cold, impacts and breaks
    • The base is 100% recyclable thermoplastic PVC with slip-resistant properties
    • Cones can be stacked with the bases on to prevent tops of the cones touching

    Get technical...
    BS EN 13422:2004

    Available in...
    500mm / 750mm / 1m
Nearby Stores