Product is featured in
Workplace Safety/Lockout Bags and Covers
Product Notes
There are no additional notes about this product.
Workplace Safety/Lockout Bags and Covers
Product Notes
There are no additional notes about this product.
Discover...
This socket lockout cover is designed to fit snuggly over sockets, switches, network points and more, to prevent any accidental use. This panel cover has two stages of operation; firstly, the base plate should be attached over the relevant switch and secondly, the housing unit should be fitted over the top of the base plate and padlocked, preventing access to the switch.
Learn more…
• Switch cover designed to ensure vital equipment cannot be accessed by locking off the socket at the wall outlet
• Suitable for standard UK single sockets, and can be used for switches, power sockets, network points and more
• To fit, isolate the power to the outlet, loosen the screws and place the cover behind the faceplate then re-tighten the screws pulling the cover into place
• Please note that the cable gaps are located at the side and may not be suitable for thicker/rigid cables
• To use cover with plug sockets, turn the cover 90-degrees
• Can be locked out using two standard padlocks, available separately
• Dimensions: 65mm x 100mm x 130mm
This socket lockout cover is designed to fit snuggly over sockets, switches, network points and more, to prevent any accidental use. This panel cover has two stages of operation; firstly, the base plate should be attached over the relevant switch and secondly, the housing unit should be fitted over the top of the base plate and padlocked, preventing access to the switch.
Learn more…
• Switch cover designed to ensure vital equipment cannot be accessed by locking off the socket at the wall outlet
• Suitable for standard UK single sockets, and can be used for switches, power sockets, network points and more
• To fit, isolate the power to the outlet, loosen the screws and place the cover behind the faceplate then re-tighten the screws pulling the cover into place
• Please note that the cable gaps are located at the side and may not be suitable for thicker/rigid cables
• To use cover with plug sockets, turn the cover 90-degrees
• Can be locked out using two standard padlocks, available separately
• Dimensions: 65mm x 100mm x 130mm
Specification
| Features | |
|---|---|
| Vendor Part Number | LOK215 |
| Brand | Spectrum Industrial |
| Brand Type | Vendor |
| Size Info | |
|---|---|
| Height (cm) | 10 |
| Height (cm) Options | 10 |
| Length (cm) | 6.5 |
| Length (cm) Options | 6.5 |
| Width (cm) | 13 |
| Width (cm) Options | 13 |
Delivery & Returns
Free delivery on all orders over £50 ex. VAT.
Returns of faulty items are free of charge, no fault returns may be subject to a handling charge. Please see the Arco Standard Returns Policy.
Returns of faulty items are free of charge, no fault returns may be subject to a handling charge. Please see the Arco Standard Returns Policy.