Product is featured in
Personal Protective Equipment/Safety Helmets
Product Notes
There are no additional notes about this product.
Personal Protective Equipment/Safety Helmets
Product Notes
There are no additional notes about this product.
Discover…
Finding head protection that’s secure and comfortable, yet that can flex to suit your application sounds difficult. This 3M SecureFit safety helmet features a ratchet harness with six different settings which allow you to find the ideal fit, while its inbuilt 3M Pressure Diffusion Technology reduces pressure on the forehead by up to 20% compared to other, more conventional hard hats. It also features a unique four-point chinstrap selector which allows the wearer to select a setting that meets either the EN 397 industrial standard or the EN 12492 mountaineering standard, depending on your application. Either way, it’s been designed using climbing helmets as inspiration and its lack of a brim gives a clear upward vision, which is ideal for working at height. This X5001VE-CE model also provides electrical insulation up to 1000V ac.
Learn more…
• Secure, comfortable UV-stabilised ABS safety helmet
• Six-point ratchet harness allows customisation of height and fit
• 3M Pressure Diffusion Technology reduces up to 20% of forehead pressure compared to standard helmet suspensions
• Four-point chinstrap selector system allows wearer to switch between industrial and mountaineering standards
• Brimless design inspired by climbing helmets to give wearer a clear upward view
• Magnetic buckle clip
• Uvicator sensor disc shows when your hard hat has been exposed to ultraviolet radiation and needs replacing
• Electrically insulated to 1000V ac
• Suitable for use down to -30°C
• Provides lateral deformation protection
• Vented for optimal airflow
• Accessory slots are compatible with 3M face shields, ear defenders and other PPE
• Fits sizes 50-63cm
• Weight: 875.5g
Get technical…
EN 397:2012 LD -30°C
EN 12492:2012
(mode can be switched between these two standards but cannot meet both simultaneously)
EN 50365:2002
Great for…
Construction / forestry / oil and gas
Finding head protection that’s secure and comfortable, yet that can flex to suit your application sounds difficult. This 3M SecureFit safety helmet features a ratchet harness with six different settings which allow you to find the ideal fit, while its inbuilt 3M Pressure Diffusion Technology reduces pressure on the forehead by up to 20% compared to other, more conventional hard hats. It also features a unique four-point chinstrap selector which allows the wearer to select a setting that meets either the EN 397 industrial standard or the EN 12492 mountaineering standard, depending on your application. Either way, it’s been designed using climbing helmets as inspiration and its lack of a brim gives a clear upward vision, which is ideal for working at height. This X5001VE-CE model also provides electrical insulation up to 1000V ac.
Learn more…
• Secure, comfortable UV-stabilised ABS safety helmet
• Six-point ratchet harness allows customisation of height and fit
• 3M Pressure Diffusion Technology reduces up to 20% of forehead pressure compared to standard helmet suspensions
• Four-point chinstrap selector system allows wearer to switch between industrial and mountaineering standards
• Brimless design inspired by climbing helmets to give wearer a clear upward view
• Magnetic buckle clip
• Uvicator sensor disc shows when your hard hat has been exposed to ultraviolet radiation and needs replacing
• Electrically insulated to 1000V ac
• Suitable for use down to -30°C
• Provides lateral deformation protection
• Vented for optimal airflow
• Accessory slots are compatible with 3M face shields, ear defenders and other PPE
• Fits sizes 50-63cm
• Weight: 875.5g
Get technical…
EN 397:2012 LD -30°C
EN 12492:2012
(mode can be switched between these two standards but cannot meet both simultaneously)
EN 50365:2002
Great for…
Construction / forestry / oil and gas
Specification
| Colour | |
|---|---|
| Primary Base Colour | Green |
| Secondary Base Colour Options |
Red Green White Yellow |
| Secondary Base Colour | Green |
| Primary Base Colour Options |
Green Red Yellow White |
| Vendor Merchandising Colour | Green |
| Features | |
|---|---|
| Garment Type | 17 |
| Helmet & bump cap adjustment | Wheel Ratchet |
| Rain gutter | false |
| Search Material | ABS |
| Vendor Part Number | X5014VE-CE |
| Brand | 3M |
| Brand Type | Vendor |
| Integrated eyewear | false |
| Standards | |
|---|---|
| Lateral deformation | LD |
| Low temperature Performance | -30c |
| Material | |
|---|---|
| Helmet & cap material | ABS |
| Size Info | |
|---|---|
| Max size (cm) | 63 |
| Min size (cm) | 52 |
| Weight (g) | 875.5 |
| Type | |
|---|---|
| Connection slot type | Euro30mm |
| Peak type | Short |
| Ventilation type | Vented |
Reviews
Delivery & Returns
Free delivery on all orders over £50 ex. VAT.
Returns of faulty items are free of charge, no fault returns may be subject to a handling charge. Please see the Arco Standard Returns Policy.
Returns of faulty items are free of charge, no fault returns may be subject to a handling charge. Please see the Arco Standard Returns Policy.
*Safety boots and hard hats are zero rated for VAT purposes for individual purchase. If you are buying for a business please click here to register or sign in to your account.